Services

Here at Rapid Plating we provide a number of different plating processes. All of them are done in house. We also provide heat treating of small parts.

For quotes, e-mail us your information at:

quotes@rapidplating.com

Office Hours:
Monday-Friday: 8 AM to 4 PM

Hours of Operation:
Monday-Friday: 7 AM to 4 PM

Chrome

Decorative chrome can be applied to many different
metals. This process includes a base plating of nickel,
copper if needed, then chrome is applied over the top.
Size limit of parts is (67”L) x (40”H) x (15”Wide)

Nickel

There is a nickel finish for almost any need.
This coating is widely used in the tool industry
Some of the Current Applications Include:
Machining, Tooling, and Decorative Applications
Exhaust Pcs, Stoves, and High Wear Parts
Size limit of parts is (67”L) x (40”H) x (15”Wide)

Black Oxide

Great for shafts, tight clearances, collars, machined
parts, threads, and more. There is no "plating" thickness
so all finished parts can be accurately re-assembled and
used with no re-tapping or threading
Size Limit of Parts is (35"L) x (35"W)x (32"H)

Zinc

This is by far the most widely used coating on the market today. Bright zinc coatings
closely resemble bright chromium. The only difference is durability. Weathering, scratches,
humidity, nothing is too extreme for zinc. Size limit of parts is (67”L) x (40”H) x (15”Wide)
We offer Zinc plating in 3 Distinct Colors:


E. N. (Electroless Nickel)

This plating process is very accurate and un-matched
in its uniformity. Due to its non-electricity based
chemistry, it out performs reg. nickel in almost all ways.
This process is unique because anywhere that
liquid can get to, is evenly plated.
Size Limit of Parts = (38"W) x (38"L) x (32"H)

E. P. (Electropolishing)

EP provides a uniform even surface that is bacteria
and contamination resistant. The electropolish process is
is the removal of material to form a highly reflective
surface; taking off burrs, scratches, and sharp edges.
Electropolishing is most frequently used on stainless
steel. Finishes vary from satin to mirror depending on
base metal, amperage, time, and other factors.
Size Limit of Parts = (38"L) x (38"H) x (10"W)